Backer Rod - Standard Closed Cell

Backer Rod - Standard Closed Cell

H&B

$1.00
(No reviews yet) Write a Review
SKU:
BACKERROD
[ASSET][SUBMITTAL] Submittal 1:
https://media.h-b.com/BACKER-ROD-STANDARD.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 1:
https://media.h-b.com/Backer+Rod+SDS.pdf
SKU Number:
BACKERROD
[PICKLIST][PART-1] Sizes:
1/4" DIA (4000 FT/BOX)|3/8" DIA (2100 FT/BOX)|1/2" DIA (2500 FT/BOX)|5/8" DIA (1550 FT/BOX)|3/4" DIA (1100 FT/BOX)|1" DIA (600 FT/BOX)|1 1/4" DIA (400 FT/BOX)|1 1/2" DIA (420 FT/BOX)|2 1/2" DIA (162 FT/BOX)|2" DIA (252 FT/BOX)|3" DIA (102 FT/BOX)
[PICKLIST][PART-2] Sizes:
4" DIA (54 FT/BOX)|CUSTOM
[PDF][PART-1] Material Conformance - Text:
  • ASTM C1330
  • Closed-cell polyethylene foam

TECHNICAL DATA - Physical Properties

  • Density Typical - ASTM D1622 - 1.5
[PDF][PART-2] Material Conformance - Text:
lbs/cu. ft.
  • Compression Deflection - ASTM D1621 - 4 psi @ 25%
  • Water Absorption - ASTM C5090 - .02% by vol.
  • Temperature Range - 90°F to 200°F
  • R-Value - ASTM C335 - 2.
    • [PDF][PART-3] Material Conformance - Text:
    2
    [PDF] Submittal Notes:

    This material is compatible with butyl, polysulfide, acrylic, polyurethane, silicone and most other cold sealants.

    [PDF][PART-1] Submittal Short Description:

    Standard Backer Rod is an ideal non-absorbent compressible backup material inserted into a joint to control sealant depth. It creates a backstop to allow proper sealant tooling and allows proper sealant of the joint surfaces. Bac

    [PDF][PART-2] Submittal Short Description:
    ker Rod forms a proper bond between the back-up material and the sealant. It can also be used as a temporary joint seal.

     

    [PDF] Assembly Image 2:
    https://media.h-b.com/backer-rod-zoom-assembly.jpg
    [ASSET][LEED] LEED:
    https://media.h-b.com/LEED+Backer+Rod.pdf
    Adding to cart… The item has been added

    Standard Backer Rod is an ideal non-absorbent compressible backup material for insertion into a joint to, control sealant depth, create a backstop to allow proper sealant tooling, allow proper sealant of the joint surfaces, and yield a proper bond between the back-up material and the sealant. It can also be used as a temporary joint seal.

    • Commonly used for glazing operations, window and door applications, expansion joints, curtain wall joints, partitions, log construction or pavement joints.
    • Standard Backer Rod is an extruded round, closed cell, low density polyethylene foam material with a skin-like outer texture. It is highly flexible and compressible for easy installation.
    • This material is compatible with butyl, polysulfide, acrylic, polyurethane, silicone and most other cold sealants.

    MATERIAL CONFORMANCE:

    • ASTM D1622
    • ASTM D1621
    • ASTM C5090
    • ASTM C335

    DIMENSIONS:

    • Available from 1/4" DIA to 6" DIA
    !