DP - Drip Plates/Edges

DP - Drip Plates/Edges

H&B

$1.00
(No reviews yet) Write a Review
SKU:
DRIPEDGE
SKU Number:
DRIPEDGE
[PICKLIST] Widths:
1 1/2"|2"|3"|CUSTOM
[ASSET][SUBMITTAL] Submittal 1:
https://media.h-b.com/SUBMITTAL+-+Drip+Plates.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 1:
https://media.h-b.com/Stainless+Steel+Drip+Edge+SDS.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 2:
https://media.h-b.com/Copper+Sheet+for+Flashing+SDS.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 3:
https://media.h-b.com/Lead+Coated+Copper+SDS.pdf
[SELLS_WITH][ACCESSORIES] Sells With:
MFLASH|CFABNASA|FLEXFLASH|TEXTROFL|HBSEALANT|CFABNA
[PICKLIST] Drip Edge Options:
Standard|Lip Brick|Flat/Flush-End
[ASSET][CAD] CAD (2D):
https://media.h-b.com/CAD+DP+-+Drip+Edge.zip
[PICKLIST] Finishes/Materials:
Type 304 - Stainless Steel - 26 ga. (standard)|Copper - 16 oz.|Type 316 - Stainless Steel - 26 ga. (SPECIAL ORDER)|Type 304 - Stainless Steel (CUSTOM GAUGE)|Type 316 - Stainless Steel (CUSTOM GAUGE)
[PDF][PART-1] Material Conformance - Text:

Stainless Steel: Type 304 (Type 316 Special Order Only)
ASTM A240/A240M, ASTM A666, and ASTM A480/A480M

Copper: ASTM B370 - #110 Alloy 
Lead-Coated Copper: ASTM B370 - #110 A

[PDF][PART-2] Material Conformance - Text:
lloy

[PDF][PART-1] Submittal Notes:
  • For corner pieces, reference “inside” or “outside” with above product numbers
  • H&B does NOT recommend galvanized sheet as a drip plate/edge

* When cleaning the exterior veneer, the clean

[PDF][PART-2] Submittal Notes:
er’s manufacturer recommendations for protecting metal MUST be followed

[PDF][PART-1] Submittal Short Description:

DP: Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform appearance. Standard DP Drip Plates are compatible with all H&B flashing products.

DP-LB:

[PDF][PART-2] Submittal Short Description:
ong> Same as above, for lip brick conditions.

Installation Instructions:
DP Series Drip Plates: Install onto a continuous bead of HB Sealant. ALL laps must be 3” min. with a bead of HB Sealant between and tooled bead of sea

[PDF][PART-3] Submittal Short Description:
lant on top of the edges of the overlap.

U.S. Pat. No. 6,584,746 Other Patents Pending

[PDF] Assembly Image 2:
https://media.h-b.com/drip-edge-lip-corner-ss-assembly.jpg
[ASSET][SUBMITTAL] Submittal 2:
https://media.h-b.com/SUBMITTAL+-+Flat+Drip+Plate.pdf
[ASSET][LEED] LEED:
https://media.h-b.com/LEED+Drip+Plate+-+Edge.pdf
[REQUIRED][ACCESSORIES] Required Accessories Standard:
HBSEALANT
Adding to cart… The item has been added

Drip Plates (Drip Edge)

  • DP
    • Our Standard Drip Plate, furnished with a smooth, factory-formed hemmed edge for installation safety and uniform appearance.
    • Standard DP Drip Plates are compatible with all H&B flashing products.
    • DP-LB
      • Same as above, for lip brick conditions.
         
  • Drip Plate Corners
    • Drip Plate Inside and Outside Corners are pre-formed pieces with a smooth, uninterrupted, hemmed drip edge to maintain the integrity of the flashing system.
    • For corner pieces, reference “inside” or “outside” with above product numbers.

NOTE:

  • The ASTM A480 standard specifies the thickness requirements for stainless steel sheets. When manufacturing stainless steel flashing and drip plates, the commonly specified standard thickness is 0.016 inches (0.40 mm), which correlates to the 26-gauge standard. H&B's Drip Plate adheres to these guidelines, falling within the acceptable range for 26 gauge with the tolerances as outlined by ASTM A480.U.S. Pat. No. 6,584,746 Other Patents Pending
  • H&B sources Stainless Steel from a wide variety of vendors. Per the International Stainless SteelForum, Stainless Steel objects have an average of 60% recycled content.
  • H&B does NOT recommend the use of galvanized sheet as a drip plate/edge.

*When cleaning the exterior veneer, the cleaner’s manufacturer recommendations for protecting metal must be followed.

!