PTA Series Anchors - PTA 310 HS

H&B

(No reviews yet) Write a Review

Write a Review

Close ×

H&B

PTA Series Anchors - PTA 310 HS

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name Required

Email Required

Review Subject Required

Comments Required

SKU:

PTA310HS

UPC:

[ASSET][SUBMITTAL] Submittal 1:

https://media.h-b.com/SUBMITTAL+-+PTA-310+HS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 1:

https://media.h-b.com/Hot+Rolled+Carbon+Steel+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 2:

https://media.h-b.com/Hot-Dip+Galvanized+Coating+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 3:

https://media.h-b.com/Stainless+Steel+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 4:

https://media.h-b.com/Round+Weep+Holes+PTA+Tubes+SDS.pdf

[PICKLIST] Finishes/Materials:

Hot-Dip Galvanized|Type 304 - Special Order

SKU Number:

PTA310HS

[PICKLIST] Thickness/Gauge:

1/4" (HEAVY-DUTY)

[SM][BOOLEAN] Anchor for Top of Wall:

Yes

[SM][PICKLIST] Concrete/Slab Above:

Yes

[PICKLIST] Rod Diameter:

5/8"

[SM][PICKLIST] Steel Beam Above:

No

[REQUIRED][ACCESSORIES] Required Accessories Standard:

305

[OPTIONAL][ACCESSORIES] Optional Accessories:

NS-NEOPRENE

[PDF][PART-1] Material Conformance - Text:

Sheet Metal (Carbon Steel):
ASTM A1008/A1008M/A (Cold-rolled)
ASTM A1011/A1011M (Hot-rolled, pickled and oiled)
Finishes - Sheet metal (Carbon

[PDF][PART-2] Material Conformance - Text:

-Steel):
Hot-Dip Galvanized - ASTM A153/A153M-B2 class B (sheet metal ties and anchors hot-dip galvanized after fabrication).
Note: Hohmann & Barnard will certify to a minimum zinc coating of 2.0 oz./ft.2

[PDF][PART-3] Material Conformance - Text:

in-left:0.0px;">Sheet Metal (Stainless Steel):
ASTM A 666, ASTM A480/480M, and ASTM A240/A240M - AISI Type 304 (Type 316 special order only)
Note: H&B rec

[PDF][PART-4] Material Conformance - Text:

ommends Stainless Steel for maximum protection against corrosion.

Rod:
Zinc Plated - ASTM A108, ASTM A36/A36M, ASTM B633 
Hot-Dip Galvani

[PDF][PART-5] Material Conformance - Text:

zed - ASTM A153/A153M-B2
Stainless Steel - ASTM A276/A276M -  Type 304 (Type 316 special order only)

PTA Tube:
Manufactured from impact-r

[PDF][PART-6] Material Conformance - Text:

esistant rigid polyvinyl chloride, tested in conformance with: ASTM D1781 (Cell Classification), ASTM D2240 (Hardness Shore D), ASTM D638 (Tensile Yield & Modulus), ASTM D790 (F

[PDF][PART-7] Material Conformance - Text:

lexural Strength & Modulus)

[PDF][PART-1] Submittal Short Description:

PTA 310 HS - PTA Series Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above, without transferring compres- sive load

[PDF][PART-2] Submittal Short Description:

s to the masonry wall below. PTA 310 HS Anchors are suitable for cast in place or post tensioned concrete construction. PTA Tube with expansion filler is placed over rod anchor, which has been engaged in the H&B 305 Dovetail Slot by the methods

[PDF][PART-3] Submittal Short Description:

illustrated. The vertical joint is then filled with mortar or grouted solid, fully surrounding the tube.

• Dimensions: 5/8" rod with 1/4” thick dovetail head. Other diameters and gauges available.
• PTA

[PDF][PART-4] Submittal Short Description:

310 HS must be used in conjunction with H&B’s 305 Dovetail Slot to ensure proper fit.

U.S. Patent No. 8,978,326 
Canadian Patent No. 2,845,330

[PDF] Assembly Image 2:

https://media.h-b.com/pta-310-hs-zoom-assembly.jpg

[PDF] Submittal Notes:

• H&B recommends Stainless Steel for maximum protection against corrosion.
• NS Neoprene sponge also available. Submittal sheet available for download from h-b.com or upon request.