PTA Series Anchors - PTA 420 HS

H&B

(No reviews yet) Write a Review

Write a Review

Close ×

H&B

PTA Series Anchors - PTA 420 HS

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name Required

Email Required

Review Subject Required

Comments Required

SKU:

PTA420HS

UPC:

[ASSET][SUBMITTAL] Submittal 1:

https://media.h-b.com/SUBMITTAL-PTA-420HS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 1:

https://media.h-b.com/Hot+Rolled+Carbon+Steel+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 2:

https://media.h-b.com/Hot-Dip+Galvanized+Coating+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 3:

https://media.h-b.com/Stainless+Steel+SDS.pdf

[ASSET][SDS] Safety Data Sheet (SDS) 4:

https://media.h-b.com/Round+Weep+Holes+PTA+Tubes+SDS.pdf

[PICKLIST] Finishes/Materials:

Hot-Dip Galvanized|Type 304 - Stainless Steel|Type 316 - Stainless Steel (Special Order)

[PICKLIST] Hole Diameter:

5/16"Ø

SKU Number:

PTA420HS

[PICKLIST] Thickness/Gauge:

3/16"

[SM][BOOLEAN] Anchor for Top of Wall:

Yes

[SM][PICKLIST] Concrete/Slab Above:

Yes

[PICKLIST] Rod Diameter:

#3 Rebar (3/8")|3/8"

[SM][PICKLIST] Steel Beam Above:

Yes

[ACCESSORIES] Recommended Accessories:

NS-NEOPRENE

[OPTIONAL][ACCESSORIES] Optional Accessories:

NS-NEOPRENE

[PDF][PART-1] Material Conformance - Text:

Sheet Metal (Carbon Steel):
ASTM A1008/A1008M/A (Cold-rolled)
ASTM A1011/A1011M (Hot-rolled, pickled and oiled)

Finishes:

[PDF][PART-2] Material Conformance - Text:

Sheet metal (Carbon-Steel):
Hot-Dip Galvanized - ASTM A153/A153M-B2 class B (sheet metal ties and anchors hot-dip galvanized after fabrication).
Note: Hohmann & Barnard will certify to a minimum zinc coating of 2

[PDF][PART-3] Material Conformance - Text:

.0 oz./ft.2

Sheet Metal (Stainless Steel):
ASTM A 666, ASTM A480/480M, and ASTM A240/A240M
AISI Type 304 (Type 316 available

[PDF][PART-4] Material Conformance - Text:

special order only)

Rod (#3 rebar): Hot-Dip Galvanized - ASTM A153/A153M-B2
Rod (3/8” smooth rod): Stainless Steel Type 304 - ASTM A582/A582M 

[PDF][PART-5] Material Conformance - Text:

g>

PTA Tube: Manufactured from Clear Butyrate.
Tested in conformance with ASTM D542, ASTM D149, ASTM D696, and ASTM D257.

[PDF] Submittal Notes:

• H&B recommends Stainless Steel for maximum protection against corrosion.
• NS Neoprene Sponge also available.

[PDF][PART-1] Submittal Short Description:

PTA 420 HS - PTA Series Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above, without tran

[PDF][PART-2] Submittal Short Description:

sferring compressive loads to the masonry wall below. PTA Series Anchors are suitable for contruction using steel or concrete. PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete or steel by any of the metho

[PDF][PART-3] Submittal Short Description:

ds illustrated. The vertical joint is then filled with mortar, fully surrounding the tube.

Standard Dimensions:

• #3 rebar (HOT-DIP GALV.) or 3⁄8” smooth rod (STAI

[PDF][PART-4] Submittal Short Description:

NLESS STEEL) 

3/16” gauge plate with 5/16"Ø holes

[PDF] Assembly Image 2:

https://media.h-b.com/pta-420-zoom-assembly.jpg

[ASSET][LEED] LEED:

https://media.h-b.com/LEED+PTA+420+HS.pdf