PTA Series Anchors - PTA RN (ROD & NUT)

PTA Series Anchors - PTA RN (ROD & NUT)

H&B

$1.00
(No reviews yet) Write a Review
SKU:
PTARN
[ASSET][SUBMITTAL] Submittal 1:
https://s3-us-west-2.amazonaws.com/catsy.807/SUBMITTAL-PTA-RN.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 1:
https://s3-us-west-2.amazonaws.com/catsy.807/Hot-Dip+Galvanized+Coating+SDS.pdf
[PICKLIST] Finishes/Materials:
Mill Galvanized|Type 304 - Special Order|Type 316 - Stainless Steel (Special Order)
SKU Number:
PTARN
[SM][BOOLEAN] Anchor for Top of Wall:
Yes
[SM][PICKLIST] Concrete/Slab Above:
Yes
[PICKLIST] Rod Diameter:
3/8" (Threaded Rod)
[SM][PICKLIST] Steel Beam Above:
No
[PDF][PART-1] Submittal Notes:

NOTE: 

  • PTA RN must be used in conjunction with 305 Dovetail Slot. 
  • H&B recommends Stainless Steel for maximum protection against corrosio
[PDF][PART-2] Submittal Notes:
n.
  • NS Neoprene sponge also available
    • [PDF][PART-1] Submittal Short Description:

    PTA RN Rod & Nut - PTA Series Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls. They permit vertical deflection of the slab above, wi

    [PDF][PART-2] Submittal Short Description:
    thout transferring compressive loads to the masonry wall below. PTA Series Anchors are suitable for contruction using steel or concrete. PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete or steel by any of
    [PDF][PART-3] Submittal Short Description:
    the methods illustrated. The vertical joint is then filled with mortar, fully surrounding the tube.

    Size: 3/8” threaded rod with beveled nut

    [REQUIRED][ACCESSORIES] Required Accessories Standard:
    305
    [PDF][PART-1] Material Conformance - Text:

    MATERIAL CONFORMANCE 

    Rod (Mill Galvanized):
    Zinc Plated - ASTM A108, ASTM A36/A36M, ASTM B633

    [PDF][PART-2] Material Conformance - Text:
    > 
    Rod (Stainless Steel):
    ASTM A582/A582M - AISI Type 304 (Type 316 available special order)

    Beveled Nut (Mill Galvanized):
    Zinc Plated - ASTM

    [PDF][PART-3] Material Conformance - Text:
    A563 grade A, ASTM B633
    Beveled Nut (Stainless Steel): ASTM A276 / A276M - AISI Type 304 (Type 316 available special order)

    PTA

    [PDF][PART-4] Material Conformance - Text:
    Tube:
    Manufactured from Clear Butyrate.
    Tested in conformance with ASTM D542, ASTM D149, ASTM D696, and ASTM D257.

    [OPTIONAL][ACCESSORIES] Optional Accessories:
    NS-NEOPRENE
    [PDF] Assembly Image 2:
    https://s3-us-west-2.amazonaws.com/catsy.807/pta-rn-zoom-assembly.jpg
    [ASSET][LEED] LEED:
    https://s3-us-west-2.amazonaws.com/catsy.807/LEED+PTA+RN.pdf
    Adding to cart… The item has been added

    PTA RN (ROD & NUT) Partition Top Anchors have been developed to provide lateral shear resistance at the upper limit of masonry walls.

    • They permit vertical deflection of the slab above, without transferring compressive loads to the masonry wall below.
    • Must be used in conjunction with 305 Dovetail Slot.
    • PTA Tube with expansion filler is placed over rod anchor, which has been attached to concrete in the method illustrated. The vertical joint is then filled with mortar, fully surrounding tube.
    • PTA Series Anchorsare suitable for construction using steel or concrete.

    GAUGES:

    • Rounds are 3/8" diameter

    AVAILABLE FINISHES:

    • PTA-RN Anchors are available in Mill Galvanized only

    NOTE:

    • Important: We are not responsible for incompatibility if ties or slots are interchanged with those of other manufacturers
    • Special high-load designs can be manufactured on a special order basis, contact our technical department for information
    !