TIE-HVR-295V - Ladder Rubble Stone Anchor System

TIE-HVR-295V - Ladder Rubble Stone Anchor System

H&B

$1.00
(No reviews yet) Write a Review
SKU:
TIEHVR295V
SKU Number:
TIEHVR295V
[PICKLIST] Wire Size:
(S) Standard Weight: 9 Gauge Side Rods x 9 Gauge Cross Rods|(EH) Extra Heavy: 3/16"Ø Side Rods x 9 Gauge Cross Rods|(SHD) Super Heavy Duty: 3/16"Ø Side Rods x 3/16"Ø Cross Rods
[PICKLIST] Block Size:
4"|6"|8"|10"|12"|14"|16"
[SM][PICKLIST] Backup Type:
CMU
[REQUIRED][ACCESSORIES] Required Accessories Standard:
JHOOK|195-295VBT
[ASSET][SUBMITTAL] Submittal 1:
https://media.h-b.com/SUBMITTAL-TIE-HVR-295V-ANCHOR-SYS.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 1:
https://media.h-b.com/Bright+Basic+Wire+SDS.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 2:
https://media.h-b.com/Hot-Dip+Galvanized+Coating+SDS.pdf
[ASSET][SDS] Safety Data Sheet (SDS) 3:
https://media.h-b.com/Stainless+Steel+SDS.pdf
[ASSET][CAD] CAD (2D):
https://media.h-b.com/CAD+TIE-HVR-295V.zip
[SM][BOOLEAN] Cavity Insulation:
Yes
[PICKLIST] Finishes/Materials:
Hot-Dip Galvanized|Type 304 - Stainless Steel|Type 316 - Stainless Steel (Special Order)
[SM][PICKLIST] Filled Cavity Condition:
No
[SM][PICKLIST] Can be Surface Mounted to Back-up:
No
[PDF] Submittal Notes:

NOTE: H&B recommends Stainless Steel for maximum protection against corrosion.

[PDF] Submittal Short Description:

Tie-HVR-295V Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls.

[PDF][PART-1] Material Conformance - Text:

MATERIAL CONFORMANCE

Hohmann & Barnard joint reinforcement products conform to:
ASTM A951/A951M (Standard Specification for Steel Wire for Masonry Joint Reinforcement)
ACI / ASCE 530

[PDF][PART-2] Material Conformance - Text:
ng> (Building Code Requirements for Masonry Structures)

Wire (Carbon Steel): Prefabricated from cold-drawn steel wire conforming to ASTM A1064/A1064M
Tensile Strength - 80,000 p.s.i. | Yield Point - 70,000

[PDF][PART-3] Material Conformance - Text:
p.s.i. minimum
Zinc Coating: Hot-Dip Galvanized after fabrication: ASTM A153/A153M-B2 (1.5 oz/ft2) 
Note: Hohmann & Barnard will certify to a minimum of 2.0 oz/ft2 (Hot-Dip Galvanized available special order only)

[PDF][PART-4] Material Conformance - Text:

Wire (Stainless Steel): ASTM A580/ASTM A580M - AISI Type 304
(Type 316 available special order)

VERTICAL J-HOOK:
ASTM A276 - Type 304

[PDF][PART-5] Material Conformance - Text:
> (Type 316 available special order)

Wire Diameter/Dimensions:
9 gauge (.148" or W1.7) or 3/16" (.187” or W2.8) Side Rods and Cross Rods available:

  • (S) Standard Weight: 9 ga. Side Rods x 9 ga. Cross Rods
[PDF][PART-6] Material Conformance - Text:
(EH) Extra Heavy: 3/16"Ø Side Rods x 9 ga. Cross Rods
  • (SHD) Super Heavy Duty: 3/16"Ø Side Rods x 3/16"Ø Cross Rods

    • Cross Rods welded 16" O.C.
    First Cross Rods welded 12" in from each end to allow lap splices per code requireme

    [PDF][PART-7] Material Conformance - Text:
    nts.

    • Vertical J-Hook 5/16"Ø or 3/8"Ø
    • 195/295 Vee Byna-Tie® is 3/16”Ø

    U.S. Patent No. 8,375,667 & 8,904,725

    [PDF] Assembly Image 2:
    https://media.h-b.com/tie-hvr-295v-zoom-assembly.jpg
    Adding to cart… The item has been added

    Ladder Type rubble (or ashlar) stone anchoring system for cavity or insulated walls.

    • In the Tie-HVR-295V, the backup is reinforced with a ladder type reinforcement with projecting boxes and a factory-welded restraint bar
    • The mason then places the vertical rod into the projecting boxes as shown (after inserting it into the hole of the flexible wire tie)
    • Rubble stone can then be tied easily to the backup using these flexible ties wherever the veneer mortar joint may lie.
    • Ideal for when horizontal mortar joints do not align, and a large amount of vertical adjustability is required.
    • Tie-HVR-295V Anchor System - Ladder Type

    DIMENSIONS/GAUGES:

    • Backup Ladder available with any combination of 9 ga. or 3/16" dia. Side and Cross Rods.
    • Vertical Hook is 5/16" or 3/8" diameter. Specify when ordering. (Engineering calculations available upon request.)
    • Vee Ties are standard 3/16" dia. x length to suit.

    AVAILABLE FINISHES:

    • Hot Dip Galvanized
    • Stainless Steel

    NOTES:

    !